Multitech CommPlete MR9600-100, Руководство пользователя

Страница: 66 / 101

MR9600-100 User Guide
60 CommPlete Communications Server
Start 2nd Exclusion:0.0.0.0
End 2nd Exclusion:0.0.0.0
Address Pool Start (<192.168.90.10>, q, -):
Address Pool End (<192.168.90.33>, q, -):
Start 1st Exclusion (<0.0.0.0>, q, -):
End 1st Exclusion (<0.0.0.0>, q, -):
Start 2nd Exclusion (<0.0.0.0>, q, -):
End 2nd Exclusion (<0.0.0.0>, q, -):
IP Address:192.168.90.4
Subnet Mask:255.255.255.0
Default Gateway:192.168.90.1
Primary DNS Server:0.0.0.0
Backup DNS Server:0.0.0.0
Frame Type:TYPE_II
Address Method:Address pool
Address Pool Start:192.168.90.10
Address Pool End:192.168.90.33
Start 1st Exclusion:0.0.0.0
End 1st Exclusion:0.0.0.0
Start 2nd Exclusion:0.0.0.0
End 2nd Exclusion:0.0.0.0
Administrator Password:********
Protocol:Local
Primary Server:0.0.0.0
Secondary Server:0.0.0.0
Shared Secret Password:********
Config Ras? (<y>, n): n
Settings have not been changed
Configure a Ras Card (1A, <->):
Device Specific Setup
1. Controller Setup
2. Ras Setup
3. T1 Setup
Enter Selection (1,2,<3>, q, -): 3
Configure a T1 Card (1B, <->): 1b
Framing Format:DS1 AT&T Extended Super Frame (ESF)
Line Coding:Binary 8 Zero Substitution (B8ZS)
FXS Signaling Options:E&M Wink Start
Transmit Level:- 0.0dB
Framing Format
1. DS1 AT&T Extended Super Frame (ESF)
2. AT&T D4 Super Frame (SF)
3. ANSI Extended Super Frame
4. G.704.ITU-T section 2.1.3.2
5. G.704.ITU-T section 2.1.3.1
Enter Selection (<1>,2,3,4,5, q, -):
Line Coding
1. Binary 8 Zero Substitution (B8ZS)
2. Alternate Mark Inversion (AMI)
3. ZBTSI
Enter Selection (<1>,2,3, q, -):
FXS Signaling Options
1. E&M Wink Start
2. E&M Immediate Start
3. Ground Start
4. Loop Start