Multitech CC1600 Series, Руководство пользователя

Страница: 44 / 76

44
MT2834BLR Owner’s Manual
4.1.3 Remote Configuration
The Remote Configuration feature is a network management tool that allows you to configure
modems remotely. This means you could configure modems anywhere in your network from one
location without having to visit the sites or rely on remote users to follow your instructions. With
Remote Configuration, which is protected by two level security, you can downline load new
parameters, program new V.42 capabilities and implement new features. Remote Configuration also
makes troubleshooting a remote location a lot easier.
The way Remote Configuration works is that S-Register S13 has been set-up to contain the special
Remote Configuration escape code. When calling a Remote Configuration equipped modem, you
enter the proper Remote Escape code to enable entering your Set-up Password. After entering it,
you can then execute AT commands as if you were connected locally. If you set S-Register S13 to
zero, Remote Configuration is disabled.
4.1.4 Remote Configuration Procedures
The procedures for using the Remote Configuration features are the same whether or not a call originates
from the remote modem. Once the modem is on-line, perform the procedures in Table 4-1.
TABLE 4-1. Remote Configuration Operation Procedures
Step Procedure
1. Remote Escape Configuration requires %%%<CR> to be sent if the default value in S-
Register S13 has not beenchanged.
The modem responds with:
1. - DATA Mode
2. - COMMAND Mode
2. You then select 1 or 2. With 1, the modem goes back into data mode and with 2 the
modem responds with:
Password>
3. Enter your Set-up Password, and if the code is correct the modem responds with:
OK
You can now use any AT commands of the modem being remotely configured as if they
were being entered locally. You cannot change the Set-up of the LOGIN Password until
you enter the proper LOGIN Password.
4. When you are done entering AT commands and you want to exit, type AT0 and hit
RETURN.
The modem responds with:
1. DATA Mode
2. COMMAND Mode
5. Enter a 1 to go back on-line with your computer, or enter 2 and the correct password to
talk to your modem.