CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
30
MultiConnect
®
Cell MTC-LAT1 User Guide
AT#SH=1
The device responds with OK.
To close the data connection, enter:
AT#SGACT=1,0
The device responds with OK.
Transferring FTP File to FTP Server
To connect to FTP server and upload files:
1.
Check signal strength.
Enter:
AT+CSQ
2.
Activate context one
Enter:
AT#SGACT=1,1
3.
Set FTP operations timeout to 10 seconds
Enter:
AT#FTPTO=1000
4.
Configure FTP server IP address with username and password.
Enter:
AT#FTPOPEN="###.##.###.#","username","password",0
where ###.##.###.# is the IP address and the username and password for the FTP server.
5.
Configure file transfer type.
Enter:
AT#FTPTYPE=#
where # is 0 for binary or 1 for ASCII.
6.
Enter the file name to be sent to the FTP server and initiate connection.
Enter:
AT#FTPPUT="file.txt"
The device responds with:
CONNECT
7.
Send the file through the device.
Closing the FTP Data Connection
When you finish sending the file:
1.
Enter the escape sequence.
Enter:
+++
The device responds with:
NO CARRIER
2.
Close the FTP connection.
Enter:
Содержание 92506964LF
Страница 1: ...MultiConnect Cell MTC LAT1 User Guide...
Страница 7: ...PRODUCT OVERVIEW MultiConnect Cell MTC LAT1 User Guide 7 Dimensions Serial...
Страница 8: ...PRODUCT OVERVIEW 8 MultiConnect Cell MTC LAT1 User Guide Serial with GPS...
Страница 9: ...PRODUCT OVERVIEW MultiConnect Cell MTC LAT1 User Guide 9 USB...
