MultiTable ModDesk Pro-L Electric L-Shaped Standing Desk, Инструкция по сборке, Страница: 8 / 24

8
3 Assembly
•
Do not yet tighten the set screws on the crossbars!
•
Tighten the socket screws only after assembling the components
in step 3.4.5 Adjustment of the frame width, page 11.
Before attempting assembly, read the safety information in Section 2.
3
.1 Checking the items supplied
• Carefully open the cardboard packaging.
• In doing so, do not use any long knife blades. They may damage the components inside.
• Check the parts supplied against the list in Section 1.4 Content box.
• Do not attempt to assemble the workstation frame if there is any damage or if there are
any incorrect components.
3.2 Packaging
• Remove the packaging. Treat as household waste/paper.
• Observe national legislation.
3.3 Tightening torques for screws used
• Assemble the workstation frame with the tools supplied only.
3.4 Assembly of the workstation
3.4.1 Pre-assembly of the Crossbars
Assemble the following components:

1
6
C
6
5
Table Top Sizing
Crossbar Measurements Width / size table top Depth / size table top Table Top Thickness
110 cm 48” 24” 3/4”
130 cm 57” 29” 3/4”
170 cm 72” 29” 3/4”
110 cm - 170 cm Custom 47” - 91” Custom 24” - 36” Custom 3/4” - 2”