
6
2 Safety Information
2.1 Symbols/warnings
The assembly/operating manual uses the following terms and signs to indicate dangers:
2.2 Symbols used on the workstation frame
2.3 Organizational measures
•
The workstation frame can best be assembled by two people. Turning the frame,
once the work surface has been fitted, is a task in particular which requires two
people!
2.4 Informal safety measures
•
Keep the assembly/operating manual in the place where the workstation frame is
used at all times.
•
Make sure that all safety information on the table (see Section 2.2, Symbols used
on the workstation frame) is legible, replacing the same if necessary.
2.5 Note for those assembling the workstation
•
The workstation must be assembled/worked on by persons over the age of 16.
•
The persons referred to above must have read and understood the assembly/
operating manual.
2.6 Transport and assembly
•
The workstation frame must be moved by two persons only, and in such cases must
be retracted.
•
Do not drag or pull the workstation frame over the floor.
•
Assemble the workstation frame with the supplied tools only. They are the only
tools which ensure that the screws can be tightened to the correct torque.
2.7 Use of the workstation frame
•
Do not allow children to use the workstation frame unsupervised. Children may be un-
aware of the dangers presented by the workstation frame. They would be in serious
danger of injuring themselves, possibly even with fatal consequences. Further adjust-
ment must then be impossible as a safeguard against use by children.
•
The workstation frame must only be used in appropriate areas.
•
Do not use the workstation frame on an uneven surface. In such conditions it will not
be steady.
•
Never exceed the maximum load on the workstation frame.
This symbol indicates an immediate threatening situation for any person’s life or
health. Failure to adhere to such information may have serious consequences for
health, or could even result in life-threatening injury or death.
This symbol indicates important information. Failure to adhere to such infor-
mation could lead to damage to the workstation.
Do not place objects or parts of the body under the workstation frame or between
the cross members. This could cause serious injury.
Do not exceed the maximum permitted load on the workstation frame. Overload-
ing could lead to breakage and serious injury as a consequence.
Содержание ModDesk Pro-L Electric L-Shaped Standing Desk
