9
STEP 8
The parts removed in STEP 5 will need to be reassembled on the Disc Axle (NH)
and the Axle (C2) of the Handlebar Post (DH). On the Axle (C2) of the Handlebar
post (DH) push on the Snap Ring (04) until it pops into its grove using the Socket
Tool provided (a rubber hammer may be needed to firmly place Snap Ring in
place. Please use rubber hammer GENTLY).
On the Disc Axle (NH) slide one Bushing (02), one Wave Washer (86), one Plastic
Roller (P) and one Washer (03) onto the Steel Disc Axle (N). Push on the Snap
Ring (04) until it pops into its grove using the Socket Tool provided (a rubber
hammer may be needed to firmly place Snap Ring. Please use rubber hammer
GENTLY). Then place one Washer (15), Protecting Cover (14) and another
Washer (15) on the Allen Bolt (16A) and attach to the Disc Axle (NH). Repeat
above on the other side.
15
13
15
16
14
15
13
14
16
15
13
04
03
16 14
04
15
86
03
02
P
03
86
14
15
04
16
P
02
Assembly Instructions
