PAGE 54 — RX1575 SERIES TRENCH ROLLER • OPERATION MANUAL — REV. #0 (04/28/15)
74
Rammax 1575
123
0047
| 21.
06.
2013
1
Place a container under the drain.
2
Open the union by turning it anti-clockwise (size 27wrench).
The oil starts to flow out immediately.
9.8.4
Replace the engine oil filter
Fig. 9-11 Engine oil filter
1
Loosen the filter
(1)
by hand or using a filter wrench.
1.1
The oil starts to flow out immediately. It’s best to place a rag under it
beforehand.
2
Replace oil filter
(2)
.
3
Screw the complete filter back in place.
9.9
Hydraulic oil
9.9.1
Checking the hydraulic oil level
Inspection window
Always check the hydraulic oil level at operating temperature with the engine run-
ning.
1
Place the roller on level ground.
2
Let the roller continue to idle.
3
Check the oil level in the inspection window.
4*
If the oil level is at the middle of the inspection glass, add 1 liter of hydraulic oil
via the filler neck.
9.9.2
Topping up hydraulic oil
1
Remove the screw lid
(1)
on the filler neck.
2
Add 1 liter of hydraulic oil.
1
2
MAINTENANCE
