MULTIQUIP Mikasa Series MVH406GH, Руководство по эксплуатации и запасным частям

Страница: 14 / 78

PAGE 14 — MVH406GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (02/04/14)
MVH-406GH— PLATE COMPACTOR COMPONENTS
Figure 4. MVH-406GH Reversible Plate
Compactor Components
Figure 4 illustrates the location of the major components for the
MVH-406GH Reversible Plate Compactor. The function of each
component is described below:
1 . Hand Grip – When operating the compactor use this hand
grip to maneuver the compactor.
2 . Forward & Reverse Lever – Push the lever forward, the
compactor will move in a forward direction, pull the lever
backwards, the compactor will move in backwards direction.
Placing the lever in the middle (midway) will cause the
compactor not to move (neutral).
3 . Handle Bar – When operating the compactor, this handle
is to be in the downward position. When the compactor is
to be
stored , move the handle bar to the upright position.
4. Guard Hook - Used to lift the machine with crane or other
lifting device.
5. Stopper - Locks the handle in place in the upward position
for stowing.
6 . Engine – This plate compactor uses a GX390U1SMX2
Honda gasoline engine. Refer to the owner’s manual for
engine information and related topics.
7 . Belt Cover – Remove this cover to gain access to the V-
belts. NEVER run the compactor without the V-belt cover. If
the V-belt cover is not installed, the possibility exist that
your hand may get caught between the V-belt and clutch,
thus causing serious injury and bodily harm.
8 . Base Plate – Designed to compact sand, clay, and asphalt.
9 . Oil Reservoir – Fill with Shell Tellus Oil 46 or equivalent
grade hydraulic oil.
10 . Vibration Case – Encloses the eccentric, gears and
counter weights.
11 . Hydraulic Cylinder – Activated by moving the travel lever.
The cylinder controls the direction of movement by the plate
compactor.
12 . Shock Absorber – Protects plate compactor from damage
by absorbing vibration during operation.
13. Throttle Lever – Controls speed of the plate compactor.
Place straight vertically to start, push fully counterclockwise
for full throttle and fully clockwise to stop plate compactor.
14. Rubber Cover – Lift this rubber cover to gain access to
the fuel tank.
1
2
13
3
5
12
7
11
4
6
14
MVH-406
10
8
9