
PAGE 18 — MVH502DSB/DSB2 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #5 (03/11/11)
4. To make the compactor move in the reverse direction pull the
travel lever ( Figure 13) backwards.
5. Firmly gasp the compactor's hand grip, the compactor will
begin moving in the desired position when the direction lever
has been placed in the desired position.
Crank Handle Start
1.
Move the throttle lever to the
START
position by opening it
to about 20 degrees (Figure 8).
2.
Pull up decompression lever (Figure 10) to position
1 and release.
Figure 11. Crank Handle Guide Sleeve
Figure 10. Decompression Lever
1. Grasp the compactor's hand grip (Figure 13), and move the
engine throttle lever (Figure 13) quickly to the
fast
position.
2. With the throttle lever in the fast position, the engine speed
should be around 2,300 RPM, therefore engaging the cen-
trifugal clutch.
Figure 13. Throttle Lever ((Fast)
3. To make the compactor move in the forward direction push
the travel lever ( Figure 14) forward.
Figure 14. Direction Lever
TRAVELING
3.
Insert the crank handle into the engine’s starting
handle guide sleeve (Figure 11).
4.
When turning the crank handle, observe the correct
operating position (Figure 12).
5.
Grasp the crank handle firmly in both hands and turn
counterclockwise at increasing speed. Five turns of
the starting handle are needed to build up enough
compression to start the engine.
6.
Once the engine starts, stop cranking and remove
the starting handle from the guide sleeve.
Figure 12. Starting Handle Operating Position
OPERATION
ALWAYS
move the throttle lever quickly without
hesitation, because increasing the engine speed slowly
causes the clutch to slip.
NOTICE
There is a risk of injury from the rotating crank handle. When
using the crank handle, keep the body clear of the handle to
avoid being struck. If the engine backfires because the handle
was not turned firmly enough release the starting handle
immediately and stop the engine.
CAUTION
CAUTION
Make sure to follow all safety rules referenced in the safety
section of this manual before operating compactor. Keep
work area clear of debris and other objects that could
cause damage to the compactor or bodily injury.
Содержание Mikasa MVH502DSB
