manualshive.com logo in svg

MULTIQUIP MAYCO LS600, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
MULTIQUIP MAYCO LS600 Скачать руководство пользователя страница 46

PAGE 46 — MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11)

Torsion Suspension

The mounting bracket (Figure 49) of the torsion suspension
assembly is bolted  directly to the trailer frame. Except for
periodic inspection of the bracket’s fasteners to the trailer
frame, no other suspension maintenance is required on
the axles.

Figure 49.  Torsion Suspension

TORSION

BAR

SPINDLE

5/8”-18 X 2”

MOUNTING

BOLT

5/8”-18

NYLOC NUT

GRADE C

AXLE
TUBE

TORSION

ARM

MOUNTING

BRACKET

If the trailer is involved in an accident have it inspected
immediately by qualified personnel. In addition, the trailer
should be inspected annually for signs of wear or
deformations.

WARNING 

-

 Trailer Impact

NEVER

 crawl under the trailer unless it is on firm and

level ground and resting on properly placed and secured
jack stands.

The possibility exists of the trailer falling thus causing
equipment damage and severe bodily harm even

 death!

Danger 

-

 Raising the Trailer

When performing trailer inspection and maintenance
activities, you must jack up the trailer using jacks and
jack stands.

When jacking and using jack stands, place them so as
to clear wiring, brake lines, and suspension parts (i.e.,
springs, torsion bars).  Place jacks and jack stands inside
of the perimeter strip on the supporting structure to which
the axles are attached

.

DANGER 

-

 Trailer Inspection

Worn or broken suspension parts can cause loss of
control, damage to equipment and severe bodily injury
even 

death!

Check suspension regularly.

Danger 

-

 Worn or Defective Suspension

Improper weld repair will lead to early failure of the trailer
structure and can cause serious injury or death.

DO NOT

 repair cracked or broken welds unless you

have a 

certified welder

 perform the repair. If not, have

the welds repaired by your dealer.

WARNING - Cracked or Broken Welds

Broken or damaged welds can cause injury or severe
damage to your trailer and contents. Inspect all of the
welds for cracks or failure at least twice a year

.

Danger 

-

 Trailer Welds

LS600 PUMP —  MAINTENANCE (TRAILER)

Содержание MAYCO LS600

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды