MULTIQUIP ga2.5Hr, Руководство по эксплуатации и запасным частям

Страница: 24 / 76

pAgE 24 — ga2.5HR 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (12/15/14)
OPERATION
8. Place main circuit breaker (Figure 15) in the
ON
position.
Figure 15. Main Circuit Breaker (ON)
9. Read voltmeter on front panel of generator (Figure 16)
and verify that 120 VAC is displayed. Using an external
voltmeter as shown in Figure 16, verify that 120 VAC
is present at the 120V twist-lock and GFCI duplex
receptacles.
Figure 16. 120V Twist-Lock/GFCI Receptacles
10. Connecting of loads (power tools, lighting etc.) to the
generator receptacles can now be done.
ON
20A
120V
OFF
V~
V
300 mV
A
A~
V
COM
120 VAC
GFCI
L5-20R
120
V
G
W
120VAC
X
NOTICE
When using a combination of dual receptacles, total
load should not exceed the rated capacity of the
generator.
stopping the Engine (Normal shutdown)
1. Place main circuit breaker (Figure 17) in the
OFF
position.
Figure 17. Main Circuit Breaker (OFF)
2. Place the engine ON/OFF switch (Figure 18) in the
" OFF " position
Figure 18. Engine ON/OFF Switch (OFF)
3. Let engine run at idle with no load for 2-3 minutes.
4. Place engine fuel valve lever (Figure 19) in the
OFF
position.
Figure 19. Engine Fuel Valve Lever (OFF)
5. Remove all loads from the generator.
Emergency shutdown
1. Place engine ON/OFF switch (Figure 18) in the
OFF
position.
OFF
20