MultiQ 42DS, Руководство пользователя

Страница: 19 / 28

18 - English
6. Screen Adjustment
6-3. OSD Adjusting and Controls
Explanation of each available picture control settings are listed in the below:

PICTURE MODE
There are four preset picture modes that you can choose from to optimize the video
picture according to the type of programming you are watching: (1) USER (2)
STANDARD (3) CINEMA (4) VIVID.
Note: each mode has its own picture settings, when Picture Mode is set as
STANSARD, CINEMA, and VIVID; the CONTRAST, BRIGHTNESS, COLOR,
SHARPNESS are not adjustable.

CONTRAST
Adjust Contrast to increase the level of
“white” in the video picture. Increasing contrast
will make the white area of the video picture brighter..

BRIGHTNESS
Adjust brightness to enhance the level of dark area in the video picture.
Increasing brightness will male dark areas more visible.

COLOR
Use color to adjust the color saturation of the picture. Increase color will make
the color more intense, reducing color setting make the color less intense.

SHARPNESS
Use sharpness to adjust the amount of detail enhancement to the video
picture. Increase the setting will enhance the edges of objects in the video
picture, decreasing the setting will reduce enhancement.

TINT
Use it to adjust the color of flesh tones. Increasing color will make the picture
with more red in appearance. Decreasing setting in left direction will shift the
picture with more green in appearance

3D NR
To improve the quality of the picture in the case of poor reception. There are four
settings to choose from; (1) OFF (2) LOW (3) MIDDLE (4) HIGH

MPEG NR
To reduce the noise of the video. There are three settings to choose from; (1) OFF (2)
LOW (3) HIGH