Multiplex Panda 1 3268, Инструкция по сборке

Страница: 16 / 48

16
Available versions
# 21 4268 KIT Panda Sport
(green)
Kit
(intended for BL-O 2812-1100 motor)
# 26 4268 RR Panda Sport
(green)
Ready-built model , servos, controller, BL-O 2812-1100 motor
#*26 4272 *RR+ Panda Sport
(green)
Ready-built model , servos, controller, BL-O 2812-1100 motor, receiver , battery
# 26 4269 RR+ Panda
(orange)
Ready-built model , servos, controller / receiver, 400 6V motor, battery
# 1 3268 RTF Panda
Mode 1 and 3 (orange)
Ready-built , servos, controller / receiver, 400 6V motor, transmitter, battery, charger
# 1 3269 RTF Panda
Mode 2 and 4 (orange)
Ready-built , servos, controller / receiver, 400 6V motor, transmitter, battery, charger
To help you when assembling the model it is a good idea to use a coloured highlighter to mark your own version in the Parts List below.
Parts List - Panda / *Panda Sport
Part No. Quantity Description Material Dimensions
KIT RR RR+ RTF
1 1 1 1 1 KIT building instructions
1.1 0 1 0 0 RR supplementary instructions
1.2 0 0 1 0 RR+ supplementary instructions
1.3 0 0 0 1 RTF supplementary instructions
1.4 0 1 *1/0 0 “Panda SPORT” power set instructions
1.5 0 1 *1/0 0 BL speed controller instructions
1.7 1 1 1 1 Model complaint processing form
2.1
0 0 *0/1 1 Panda decal sheet (orange) Printed adhesive film 300 x 1000 mm
2.2
1 1 *1/0 0 Panda Sport decal sheet (green) Printed adhesive film 400 x 800 mm
3 1 1 1 1 L.H. fuselage shell Moulded Elapor foam
4 1 1 1 1 R.H fuselage shell Moulded Elapor foam
5 1 1 1 1 L.H. wing panel Moulded Elapor foam
6 1 1 1 1 R.H. wing panel Moulded Elapor foam
7 1 1 1 1 L.H. tailplane panel Moulded Elapor foam
8 1 1 1 1 R.H. tailplane panel Moulded Elapor foam
9 1 1 1 1 Fin Moulded Elapor foam
KIT RR RR+ RTF Small parts set
(factory-fitted, except for KIT version)
20 3 3 3 3 Hook-and-loop tape, “hook” Plastic 25 x 60 mm
21 3 3 3 3 Hook-and-loop tape, “loop” Plastic 25 x 60 mm
22 1 1 1 1 “Twin” control surface horn Plastic Ready made
23 1 1 1 1 Articulated swivel connector barrel Metal Ready made, 6 mm Ø
24 2 2 2 2 Socket-head grubscrew Metal M3 x 3 mm
25 1 1 1 1 Swivel pushrod connector Metal Ready made, 6 mm Ø
26 1 1 1 1 Washer Metal M2
27 1 1 1 1 Nut Metal M2
28 1 1 1 1 Allen key Metal 1.5 mm A/F
29
2 2 2 2 Countersunk screw (pivot housing cover) Metal M2 x 10 mm
30 50 50 50 50 Trim ballast Metal balls 4 mm Ø, approx.15 g
31
1 1 1 1 Mushroom-head self-tapping screw (spar joiner) Metal 2.2 Ø x 6.5 mm
KIT RR RR+ RTF Plastic parts set
(factory-fitted, except for KIT version)
40
0 0 *0/1 1 Fuselage hatch frame (orange) Plastic Ready made
40.1
1 1 *1/0 0 Fuselage hatch frame (green) Plastic Ready made
41
0 0 *0/1 1 Fuselage hatch (orange) Plastic Ready made
41.1
1 1 *1/0 0 Fuselage hatch (green) Plastic Ready made
42
0 0 *0/1 1 Nose fairing (orange) with motor bulkhead Plastic Ready made
42.1
1 1 *1/0 0 Nose fairing (green) with motor bulkhead Plastic Ready made
43 2 2 2 2 “Nano” servo mount, upright Plastic Ready made
44 1 1 1 1 Spar joiner Plastic Ready made
45 1 1 1 1 Wing retainer Plastic Ready made
46 1 1 1 1 Tailplane pivot housing Plastic Ready made
47 1 1 1 1 Tailplane pivot housing cover Plastic Ready made
48 1 1 1 1 Tailplane joiner and shaft Plastic Ready made
49 1 1 1 1 Tailplane joiner and retainer Plastic Ready made
50 1 1 1 1 Tailplane crank Plastic Ready made
KIT RR RR+ RTF Wire and spar set
(factory-fitted, except for KIT version)
60 2 2 2 2 Wing spar Square aluminium 8 x 6 x 300 mm
61 1 1 1 1 Wire elevator pushrod, pre-formed Metal 0.8 Ø x 535 mm
62 1 1 1 1 Wire rudder pushrod, pre-formed Metal 0.8 Ø x 565 mm
63 1 1 1 1 Elevator snake sleeve Plastic 2/1 Ø x 470 mm
64 1 1 1 1 Rudder snake sleeve Plastic 2/1 Ø x 500 mm
65 1 1 1 1 Fuselage stiffener tube Square aluminium 8 x 6 x 380 mm
GB