background image

   

               Introduction

A programmable controller is used to switch the heating system and/or the hot 

water in your home on and off  as needed. It works by controlling the central 

heating and/or the hot water with  programmed settings that take eff ect at 

diff erent times of the day.

Product Compliance

EU Directives: 2014/30/EU, 2014/35/EU and 2011/65/EU. 

           Safety Information

Use in accordance with the EU and national regulations.

For indoor use only.

Keep your device completely dry. This product must be installed by a competent 

person and in accordance with all the EU and national regulations.

Always isolate the AC Mains supply before installing or working on any 
components that require 230 VAC 50Hz supply.

Thank you for purchasing the 

22-23015 Single Channel Digital Time 

Clock 

for 230 V.

22-23015 Single Channel Digital Time Clock

CH or HW

Installation

Input:      230V, 50Hz
Output:   3A/ switch terminal

 Terminal 

Description                                       Backplate

 

Mains Neutral

 

Mains Live

 

Not Used

 

Not Used

 

Volt Free Connection

 

Volt Free Connection 

  

Earth Parking

  

(

no electrical connection

)

N L 1 2 3 4

N L 1 2 3 4 5 6

Jumper Settings

Changes to the jumpers settings should 

only be made by the Engineer carrying out 

the installation or other qualifi ed person. 

The installer should select the jumper 

positions required if changes need to 

be made to the factory default settings. 

These jumpers are found on the rear of the 

controller. 

* P - Fully pumped system for independent Central Heating and Hot Water.

* G - Gravity Hot Water system with Pumped Central Heating.

22-23015 Switching Bridges

Switch

Program

5-2 days programme or

24h programme

Fully pumped system(P*)

or gravity-fed hot water 

system(G*)

Disable/enable the internal 

backup battery

System

Feature

22-23015 Settings

Memory 

Backup

5-2

OFF

NA

First Power Up

Button Function

Backlight/

Holiday

Mode

+1Hr

Down

Up

Select

Set

Reset

1. Turn on the LCD backlight
2. Press for 3 sec to activate Holiday mode

Select operating mode (ON, ONCE, AUTO, ADV, OFF)

Activate/deactivate Boost function

Decreases the selected setting

Increases the selected setting

Select a clock or programme setting

Sets a clock or programme setting

Reset to Factory settings

MODE

SELECT

SET

+HR

MODE

+Hr

SELECT

SET

<

<

MODE

+Hr

SELECT

SET

<

<

Setting date and time

3 sec

Choose your clock format 

and press Select.

Press and hold the indicated 

buttons together for 3 sec.

Single Channel Digital Time Clock 
for 230V

Model: 22-23015

The Single Channel Digital Time Clock is recommended for users that 
want to control only the Central Heating or the Hot Water system.

Multipipe Ltd

Unit 12 Great Ha

yes Business 

Park

Low

er Burnham R

oad

Stow M

aries

Chelmsfor

d

Essex

CM3 6SQ

Sales

T: 01245 227630

E: [email protected]

.uk

Technical

T: 01245 850799

E: technical@multipipe

.co.uk

ww

w.multipipe

.co.uk

INSTALLER MANUAL

Отзывы: