SPC1010ODX Accu-Set Digital Wall Clock
Instruction Manual & Warranty
Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your
clock. Please read these instructions and store them in a safe place for future reference.
1. LCD display
2. Wall mount
3.
4. TIME SET button
5. CAL. SET button
6. Lithium battery
compartment
7. Battery compartment
8. DOWN / C/ F button
9. Table stand
10. TIME ZONE switch
11. RESET button
12. DST ON/OFF button
FEATURES
SETTING PROCEDURE FOR THE CLOCK
Note: Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries, only batteries of the
same or equivalent type as those recommended are to be used. Do not mix new and old batteries.
TEMPERATURE DISPLAY
C/ F
The temperature displays indoor temperature. At anytime switch between Celsius or Fahrenheit by pressing
button.
UP / 12/24 button
1. Slide the
switch to the correct time zone.
2. Press the
button to turn on the DST function if your area does observe DST.
3. Once all above is completed, insert
A
4. The clock will fast forward to the correct time.
1. Press and hold the
button, the hour digit will start flashing.
2. P
Press the
button again, the minute digit will start flashing.
4. P
button again to confirm the setting.
1. Press and hold the
button, the year digit will start flashing.
2. P
Press the
button again, the month digit will start flashing.
4. P
Repeat the above steps for date and language, and press the
button again to confirm the setting.
Press the
button to switch between 12 hour or 24 hour display mode.
- If you live in an area that does observe DST, press the
button to turn on the DST function. The clock will now
adjust automatically each spring and fall to correct for the 1-hour time change.
- If you live in area that does not observe DST, such as Arizona, Hawaii, or parts of Indiana, you do not need to do any
setting.
The Accu-Set time memory is maintained by a lithium button cell battery, model CR2032. The expected life of this
battery is about 3 years. Be sure that the two AA/LR6 batteries in the clock are fresh. This battery is located in the
small battery compartment. Open the lithium battery compartment with a screwdriver and replace the CR2032 lithium
battery observing the polarity. Then, close the compartment.
Before inserting the 2 ì AAî batteries into the battery compartment
Time Zone
DST
M
OPTIONAL
OPTIONAL
ANUAL TIME SET FUNCTION
TIME SET
UP
DOWN
TIME SET
UP
DOWN
TIME SET
MANUAL CALENDAR SET FUNCTION
CAL. SET
UP
DOWN
CAL. SET
UP
DOWN
CAL. SET
12/24 HOUR DISPLAY
12/24
DST FUNCTION
DST
REPLACING 3V LITHIUM BATTERY
2
/
6
(
)
,
.
x A LR batteries preferably alkaline batteries into the battery
compartment following the polarity as shown on the diagram inside the compartment
ress the
or
button to advance to the correct hour.
3.
ress the
or
button to advance to the correct minute.
5. Press the
ress the
or
button to advance to the correct year.
3.
ress the
or
button to advance to the correct month.
5.
1
2
3 4 5 6
7 8
9 1011
12
