MultiMix Simplex Eco, Инструкция по установке и эксплуатации

Страница: 10 / 64

ELECTRONIC CONTROL PANEL
EN - English
Page 10
Once the control panel is back in service mode, the display
will show:

The holiday mode is automatically cancelled when a
regeneration is manually initiated!
PROGRAMMING INSTRUCTIONS -
BASIC SETTINGS

Before entering the programming mode, make sure that
the appliance is in service mode.

In case no button is pressed in a period of 5 min, the
control panel will automatically return to the service mode;
any changes made will NOT be saved!
1.
Press the scroll button and hold it for 2 sec until the
display shows:

Press the up or down button to set the
language.
2.
Press the scroll button again; the display will show
(does not apply to Duplex Alternating!):

Press the up or down button to set the time of
day.
3. Press the scroll button again; the display will show:
 Press the up or down button to set the unit of
measure for water hardness. Make sure it is identical
to the unit of measure of the water hardness test kit
or water analysis report that is used to determine the
hardness of the incoming untreated water!
4. Press the scroll button again; the display will show:

Press the up or down button to set the hardness
of the incoming untreated water.
5.
Press the scroll button again; the display will show:

Press the up or down button to save the settings
into the NOVRAM® and exit the programming mode.
8:01 Holiday
Language:English
Set time: 8:01
Set Hardn: XX °f
HardUnit: °f
Exit