Multifeeder MFT 102hsm, Руководство оператора

Страница: 85 / 85

3.6.2 PERFORMANCE WARRANTY. Upon request of the Buyer, Multifeeder Technology, Inc. will negotiate and price into its Proposal an efficiency
level (parts per minute at a to-be-determined confidence level) for each type of Product Sample received by MFT, in sufficient quantities and
with sufficient time to perform testing on the System, provided that such Product Samples are consistent and conforming. For purposes of
calculating an efficiency level, all lost time or lost production due to Nonconforming Product Samples or factors out of MFT’s control shall
be subtracted from the production uptime, and product changeover time is excluded. To qualify for any applicable performance warranty the
Buyer agrees to comply with the following:
a) The System will be completely installed by qualified MFT personnel and all operators will be properly trained by qualified MFT
personnel;
b) Buyer will notify MFT in writing of any deficiencies observed in the System’s performance with sufficient detail to assist MFT in determining
the source of the reported problem;
c) Product Samples are in compliance with the Product Sample requirements and tolerances specified herein; and
d) Upon proper notification of any problem, MFT will have 30 days to repair, replace, or arrange a partial or complete refund in exchange for
returning the defective equipment. The amount of refund will depend upon the problem, equipment condition upon return, and the assignment
of responsibility. The amount of any refund will be within the sole discretion of Multifeeder Technology, Inc
[ 85 ]
Setup Maintenance Terminology Safety Introduction Terms/Conditions