Multifeeder MFT 102hsm, Руководство оператора

Страница: 83 / 85

13.3 Counterparts. This Agreement may be executed in multiple identical counterparts, all of which taken together constitute a single
agreement.
13.4 Entire Agreement. This Agreement and any exhibits attached hereto, including Multifeeder Technology, Inc. General System Default
Specifications (Exhibit A), constitute the entire agreement and understanding between Buyer and Seller. All prior written or oral agreements,
undertakings, promises, warranties, or covenants relating to any subject matter not expressly set forth within this Agreement are hereby
superseded.
13.5 Amendments and Waivers. No inconsistent, additional or modified terms or conditions, including price, will apply unless specifically agreed to
in a writing signed by Buyer and Seller. No waiver of any provision or condition shall be valid unless set forth in a writing signed by the waiving
party.
13.6 Force Majeure. Whether foreseen or unforeseen, Seller will not be liable for any failure, defect in performance, delay in the performance of
orders or in the delivery of goods, or for any damages arising from events beyond Seller’s reasonable control, including without limitation, acts
of Buyer, acts of God, accidents, fires, floods, acts of insurrection or war, governmental interference, embargo, delays by the shipper, strikes,
labor disturbances, unavailability or shortage of supplies or raw materials, unforeseen absence of transportation capabilities or rescheduled,
postponed or cancelled transportation arrangements, changes due to export controls or the ability to obtain an export license, or any other
like cause.
13.7 Limit of Time to Bring Action. No actions or arbitrations arising out of this Agreement may be brought by Buyer more than eighteen (18) months
after the occurrence of the event giving rise to such action or arbitration.
13.8 Attorneys Fees. Seller will be entitled to recover reasonable attorneys’ fees and costs in any proceeding to enforce payment from
Buyer.
13.9 Buyer’s right to use all of Seller’s products, systems and materials are conditioned upon Buyer’s acceptance of these Terms and
Conditions.
EXHIBIT A: MULTIFEEDER TECHNOLOGY, INC.
GENERAL SYSTEM DEFAULT SPECIFICATIONS
1.0 SCOPE. The scope of these Default Specifications is to define the equipment configuration and performance requirements for the Custom
Multifeeder Technology, Inc. System (hereinafter “System”). All definitions set forth under the MFT Terms and Conditions apply to these
Default Specifications.
2.0 APPLICABLE DOCUMENTS.
National Electric Code 1993
3.0 DEFAULT SPECIFICATIONS. The System shall be configured as specified herein (the “Default Specifications”), unless more specifically
defined in the applicable Proposal. To the extent that any of the Default Specifications specified here are varied by the Proposal submitted
to Buyer, for the purposes of creating custom-designed product-specific or application-specific requirements, those specifications that are
specially varied will apply. Other than to the extent specifically varied in the Proposal, the Default Specifications apply.
3.1 POWER REQUIREMENTS. Each Subsystem will have 110 VAC +/-10%, 50/60 HZ or 208 VAC +/- 10% 50/60 HZ single phase power
available on a circuit capable of delivering 15 amps minimum per feed station. The power will be clean and free from power surges or power
outages. The power, fusing, wiring and disconnects will be in accordance with the applicable requirements of the National Electrical Code,
as updated.
[ 83 ]
Setup Maintenance Terminology Safety Introduction Terms/Conditions