1
Hot Air Rework Station
Model: MP740111
Страница 1: ...1 Hot Air Rework Station Model MP740111 ...
Страница 2: ...le has cooled down completely Do not use the product near flammable items Turn the power off when this product is not in use The desoldering tool must be placed on its stand when not in use Before storage turn the power off and allow the product to cool down to room temperature Do not use this product for anything else other than that for which it is designed Children should be supervised to ensur...
Страница 3: ...e to memory press and hold the STORE CALL button for about two seconds To recall a setting briefly press STORE CALL again Sleep Function When the hot air tool is placed in the support holder heating is turned off and cooler air is produced until the temperature of the nozzle is reduced to 100o C then SLP is displayed on the LCD Remove the tool from the holder and the station will resume normal wor...
Страница 4: ...ube Resolder the wires to the PCB as before Reposition the PCB into the handle half and replace the screws Place the fan into position and replace the upper handle half Replace and tighten the two screws and refit the heater shroud Reconnect the mains supply and test and if required re calibrate the tool SPECIFICATIONS Input Voltage 220 240V 50Hz Power 700W Max Display Red LCD Digital Temperature ...
