Multicomp-Pro
27
(4)
Set the network parameters of the oscilloscope
. In the oscilloscope, click the
icon, click
Utility
. Select
Function
in the bottom menu. Select
LAN Set
in the left
menu. In the bottom menu, set the
Type
item
as
LAN
, and select
Set
. In the right
menu, set
IP
and
Port
to the same value as the "Ports-settings" in the software in step
(3). The Gateway and Subnet mask should be set according to the router. Select
Save
set
in the bottom menu, it prompts "Reset to update the config". After resetting the
oscilloscope, if you can get data normally in the oscilloscope software, the connection
is successful.
Figure 4-7 Set the network parameters of the oscilloscope
5.
Use the Multimeter
Input Terminals
The input terminals are on the Top of the oscilloscope
.
Multimeter input
Figure 5-1 Multimeter Input Terminals
Содержание MP720644
Страница 1: ...Models MP720644 and MP720774 Quick Guide...
