Page <8>
V1.0
07/01/22
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
Trig
Accesses the softkeys that allow you to select the trigger mode
of the analyzer.
TG
Accesses the softkeys that allow you to set the tracking
generator.
Demod
Accesses the softkeys that allow you to set the
demodulation.
Marker measure keys
Peak
Places a marker on the highest peak, and accesses the Peak functions
menu.
Marker
Accesses the marker control keys that select the type and number of markers and turns
them on and off.
Marker
Accesses the marker function softkeys that allow you to set other system parameters
based on the current marker value.
Marker
Fctn
Accesses the menu of special functions, such as marker noise, N dB bandwidth measure
and frequency counting.
Advanced measure keys
Meas
Accesses the softkeys that let you make transmitter power measurements such as
ACPR(adjacent channel power), channel power, and OBW(occupied bandwidth), etc.
Meas
Setup
Sets the parameters for the selected measurement
function.
Utility keys
System
Sets the system parameters, and accesses the calibration
menu.
File
Accesses the softkeys that allow you to configure the file system of the
analyzer.
Preset
Resets the analyzer to the factory settings, user state or Last off state. This state can be
specified in [System]→ [PowerOn/Preset►]→[Preset►].
Quick
Save
Quickly save screenshots, trace data, and user
status
Save/
Recall
Save/recall screenshots, trace data, user
status
Help
Press the Help key to activate the help system. Press the Help key
again to exit.
→
