Seven: Programming for Use with Z-Wave Devices
65
Providing a brighter solution.™
Renaming a Scene
As supplied, the PE953 screen displays the names of the five scenes as SCENE 1, SCENE 2, etc.
You can rename the scenes so they better describe their actual function, making the system
easier to use.
If necessary, press and release any button on the Hand-Held
1.
Controller to wake it from sleep.
If the screen is not displaying
LEARN MODE, press and hold the
<P/S>
and
<ENTER>
buttons at
the same time to put the device into programming mode. You are in
programming mode when the LEARN MODE screen is displayed, as
shown at the right.
Press the
2.
<ENTER>
button as necessary to display the Z-Wave user
screen, as shown at the right.
Press the
3.
DOWN
button as necessary to reach the Z-Wave Options
screen, as shown:
Press the number button for the scene you want to rename. The
4.
screen shifts to show just that scene name, and highlights the first
letter of the name.
Use the
5.
UP
or
DOWN
arrow buttons to scroll through the list of
available characters to use in the Scene name. The valid character
set for names is: A-Z, 1-9, and SPACE.
When you have selected the right letter or number, press the
6.
<P/S>
button to move right to
the next character.
Repeat Steps 6 and 7 until you have completed the renaming.
7.
Press the
8.
<ENTER>
button to save the name and return to the Z-Wave OPTIONS screen as
shown above. Press the
<ENTER>
button as necessary to return to the Main screen.
LEARN MODE 00-00P
1 RESET CONTROLLER
2 RESET DEVICE
3 INCLUDE DEVICE
4 ADD TO SCENE
5 REMOVE FROM SCENE
UP-PREVIOUS DWN-MORE
SCENE ACTIVATION
1 SCENE 1
2 SCENE 2
3 SCENE 3
4 SCENE 4
5 SCENE 5
Z-WAVE OPTIONS 00-00P
1 SCENE 1
2 SCENE 2
3 SCENE 3
4 SCENE 4
5 SCENE 5
UP-PREVIOUS DWN-MORE
Z-WAVE OPTIONS 00-00P
2 SCENE 2