18
QuickCarrier Developer’s Guide
Chapter 6 – MT100UCC-H5 Models
The QuickCarrier USB HSPA is an embedded USB cellular modem uses HSPA technology to deliver some of
the fastest cellular data speeds. These quick-to-market devices combine a network approved cellular
SocketModem and a USB carrier card in one compact design. With its 4-pin USB interface the QuickCarrier
USB embedded cellular modem cables to an existing device’s internal USB port and can be secured using
the four mounting holes located at the corners of the printed circuit board. Embedding M2M connectivity
into your Windows or Linux device has never been this quick or this easy.
Technical Specifications
The QuickCarrier USB HSPA cellular modem meets the following specifications:
Category
Description
Standards
High Speed Packet Access (HSPA)
Circuit-Switched (CS) domain data service based on UMTS and GSM
Frequency Bands
HSUPA / HSDPA / UMTS Triple-band: 2100/1900/850 MHz with Rx diversity
GSM/GPRS/EDGE 850/900/1800/1900MHz
Data Speed
HSPA+ Models:
HSPA+ data up to 21.0 Mbps downlink / 5.76 Mbps uplink
Penta-band HSPA: 850/900/1700/1900/2100 MHz
Quad-band GSM/GPRS/EDGE: 850/900/1800/1900 MHz
Driver Support
Windows and Linux
USB Interface
USB 2.0 Low/Full/High Speed Compliant
Weight
1.536 oz (43.5 g)
Dimensions
3.650" x 1.375" (92.71 mm x 34.925 mm)
Operating
Temperature
-30° C to +85° C
Storage Temperature
-40° to +85° C
Humidity
20% to 90% non-condensing
Input Power
USB bus powered
5VDC user-supplied through 2-pin header (optional)
Operating Voltage
Supply Range: 4.55V to 5.5V
1.1A nominal current
Device may be damaged if voltage exceeds 5.5V
SMS
Point-to-Point messaging
Mobile-Terminated SMS
Mobile-Originated SMS
Antenna Connector
2 x UFL, cellular and RX diversity
SIM Holder
Standard 1.8 / 3V SIM card holder
