Multi-Tech MultiConnect mDot MTDOT Series, Руководство разработчика

Страница: 50 / 69

MICRO DEVELOPER KIT
50 MultiConnect
®
mDot
TM
MTDOT Developer Guide for Japan
Chapter 13 – Micro Developer Kit
Micro Developer Kit
Designed specifically for mDot development, the Micro DK plugs directly into a USB port on your computer making
it easy to use the developer kit for testing, programming, and evaluating your application.
Note: To work with the developer board, you need an X1P mDot model which includes a programming header.
Developer Kit Package Contents
Your Developer Kit (MTMDK-ST-MDOT) includes the following:
Developer Board 1 - MTMDK mDot Developer Board
Antenna 1 - 868-945 MHz LoRa Antenna
Cable 1 - Programming Cable
Customer Notices This Quick Start
Update your developer board ST-LINK/V2 firmware through the mDot mbed page at
https://developer.mbed.org/platforms/MTS-mDot-F411/#general-technical-references
Firmware Updates
Before starting your project development, make sure you have the latest firmware for the Micro Developer Kit and
mDot. Go to the mDot mbed page for MicroDK firmware.
https://developer.mbed.org/platforms/MTS-mDot-F411/
Windows Drivers
For Windows 10, you do not need additional drivers.
For Windows 7, the MTMDK board has an Exar chip for the serial communication port and you need an Exar driver
to send AT Command to the mDot. You do not need the ST-Link driver for the serial communication port (AT
Commands).
https://www.exar.com/content/document.ashx?id=1596 .
To debug the processor with Windows 7, you do the ST-Link driver with the MTMDK board.
https://developer.mbed.org/teams/st/wiki/ST-Link-Driver .
Note: You do not need a driver for the USB mass storage feature.