○
OPERATION CONDITION & CONNECTlON
△
! WARNlNG
POSSIBLE ELECTRICAL SHOCK
●
This instrument is for the use of low voltage circuit.
Do not make measurements of power lines carrying more than AC500V.
Before use, check and confirm the voltage of circuit to be measured.
●
Apply only the coated cables and do not clamp bare cables.
POSSIBLE ELECTRICAL SHOCK OR ACCIDENT
●
Do not handle the instrument in the rain, at humid place, with a drop of water
and or with wet hands.
●
Do not use the instrument if the CT or CT case are damaged and if something
is wrong with the CT cables.
●
When replacing the batteries, remove the instrument from all measuring
circuits.
●
Do not load the voltage exceeding AC10V to the input & output terminals of
instrument body.
△
!
CAUTION
FOR SAFETY USE
●
Do not drop the instrument & CTs and or do not give the strong shock .
●
Do not put heavy goods on the cables of instrument, CTs & Accessories and
do not modify those cables.
●
If dropping CTs and or giving strong shock, the joint surface of CTs are
damaged and it may cause wrong influences to the measurement.
●
To avoid defect of CTs due to the break of cables, do not bend and or pull the
cables at the base of CTs. Handle them very carefully.
- 2
-
