1.
FEATURES
●
Multi functional clamp-on tester.
●
Additional AC/DC voltage, resistance, diode test and continuity check.
●
Data hold and auto power off function.
SAFETY SUMMARY
observe by all means
●
To use this instrument safely, read this "SAFETY SUMMARY" carefully and
apply the instrument correctly.
●
The CAUTIONs and WARNINGs which appear on the following pages are stated
to prevent the operator & other people from the dangers and their properties from
the damages beforehand.
△
WARNING : This symbol indicates the contents "Possibilities of the death or
the serious wound can be supposed" caused from mis-operations.
△
CAUTION : This symbol indicates the contents "Possibilities of the injury or
only the material damage can be supposed" caused from mis-
operations.
△
WARNING
POSSIBLE ELECTRICAL SHOCK
This instrument is for the use of low voltage circuit.
Do not make measurements in the circuit more than AC 600V.
Before use, check and confirm the voltage of circuit to be measured.
Apply only the coated cables and do not clamp bare cables.
POSSIBLE ELECTRICAL SHOCK OR ACCIDENT
Do not handle the instrument in the rain, at humid place, with a drop of water and
or with wet hands.
Do not use the instrument if the CT or CT case are damaged and if something is
wrong with the CT cables. Also, do not use leaving the battery cover off.
Do not give the shock to tip of CT.
When replacing batteries, remove the instrument from all circuits to be measured.
It may cause damage of the instrument.
Do not disassemble the instrument.
Do not make measurement of power lines carrying more than 250V for safety.
Do not apply voltage to the both ends of test leads when measuring resistance
and testing diode.
