MULTI MEASURING INSTRUMENTS MCL-550D Скачать руководство пользователя страница 1

 

 

AC LEAKAGE/LINE CURRENT 

DIGITAL CLAMP-ON TESTER 

 

MODEL    MCL-550D 

 
 

INSTRUCTION MANUAL 

 

 

                            Thank you very much for selecting our digital AC Clamp-on   
                            Tester MCL-550D. 
                            This model is complex instrument, employing a very reliable 
                            mechanical/electronic design. 
                               

  Before you use your new instrument, read this Instruction 

                            Manual completely and familiarize yourself thoroughly with   
                            all functions.   
 
                            Keep this manual carefully to take out whenever you need.           
 
                               
 
 
 
 
 
                                    MULTI MEASURING INSTRUMENTS CO.,LTD. 
                                    Akihabara Murai Bldg. 7F, 1-26 Kanda Sakuma-cho, 
                                    Chiyoda-ku, Tokyo, Japan, 101-0025 
                                    TEL : +81-3-3251-7016    FAX : +81-3-3253-4278 
                                    Home Page : 

http://www.mutimic.com/

 

                                    E-mail : 

[email protected]

 

 

Содержание MCL-550D









Отзывы: