4. DIMENSIONS AND PANEL FUNCTION
①
Current transducer(Jaw)
②
Jaw opening lever
③
Power switch
④
Range selector switch
⑤
Data hold switch
⑥
LCD display
⑦
Input terminal(V)
⑧
COM terminal
⑨
Input terminal(
Ω
)(
｜
)
⑩
Battery cover
○
11
Wrist strap
5. METHOD OF MEASUREMENT
5-1. Measurement of AC Line Current
①
Set the power switch to "ON" position.
②
Set the range selector switch to a range
appropriate to the current to be measured.
Start the measurement at top range and
then work down to lower range.
③
Clamp the conductor of the circuit at the
center of CT.
④
Read the current value in the display.
⑤
If you make measurements in a dark place
or in a place where it is difficult to see the
readings, use the data hold switch. Fig.1
Note : Clamp around only one conductor of the circuit to be measured. (See Fig.1)
When making the clamp measurements for high AC current, the noise sound
of CT may be caused, however, this is not abnormal.
