Task management (ISOBUS-TC)
Configuring ISOBUS-TC
10
30322538-02-EN
V9.20191001
67
1.
- Open the ISOBUS-TC application.
2.
Tap “Settings”.
3.
Tap “Operating Mode”.
4.
Tap “Extended” if you want to work with tasks. Tap “Standard” to be able to work without tasks.
5.
- Confirm.
⇨
You will be asked whether you want to change the setting.
6.
Tap “Yes” if you want to confirm this.
⇨
All data will be saved and the operating mode will be switched.
7.
Wait until all messages have faded out.
What happens with the data?
The data structure is different in the two operating modes. After changing the mode, the task and field
data will be saved. When switching again, the stored data will be loaded.
“TC number” parameter
Number of the Task-Controller. For complex systems with multiple terminals and Task-Controllers,
several Task-Controllers can be distinguished based on this number. If need be, you can control
which Task-Controller the connected job computer should communicate with.
“Prefer internal Tractor-ECU?” parameter
This parameter is important on vehicles that have their own Tractor-ECU in addition to the ME
terminal.
Activate the parameter if the GPS receiver is connected to the ME terminal or to the TRACK-Leader
AUTO steering system. Deactivate the parameter if the GPS receiver is connected to a different
terminal.
“Save finished tasks as a file?” parameter
If this parameter is activated, all ISO-XML tasks are saved on the memory device as a text file.
“Validation of the device description” parameter
Optional parameter. Deactivated per default.
Please note that when the parameter is activated, Task-Controller version 3 is supported. If the
parameter is deactivated, Task-Controller version 2 is supported.
Only activate this parameter if you want to ensure that SECTION-Control and ISOBUS-TC only
communicate with AEF-compliant job computers.
Job computers that are not AEF-compliant are not supported by ISOBUS-TC in this case.
Procedure
10.1.3
10.1.4
10.1.5
10.1.6
