MISG-IO-M
i
!
!
!
!
!
3 Safety Instructions
Strain Gauge Amplifier IO-Link
Page-4
3.1 Intended Use
Please select the correct strain gauge amplifier regarding function and equipment before mounting, start-
up and operation.
Further important safety instructions are in the individual chapters.
Warning
The MISG-IO has been designed and constructed solely for the intended use described here and may only be
used in this way.
The technical specifications as described in this operating manual are mandatory. Inappropriate handling or operating
the device outside of its technical specifications requires an immediate shutdown and inspection by the manufacturer.
When the device is transported from a cold into a warm environment, condensation can cause a device malfunction.
Wait for device temperature and room temperature to equalize before a new start-up.
The manufacturer shall not be liable for claims of any kind based on operation contrary to the intended use.
Warning
3.2 Personnel Qualification
For mounting and start-up of the MISG-IO the personnel will have to be familiar with the applicable country-specific
regulations and directives and have the required qualifications. They must have knowledge of measurement and
control technology, be familiar with electrical circuits, be able to carry out the work described and recognize potential
hazards independently. Depending on the operating conditions, other knowledge may also be required, e.g. of
corrosive media.
Risk of injury if qualification is insufficient
Improper handling can lead to considerable property damage and injury.
- The required tasks as described in this operating manual should only be conducted by qualified
personnel with the qualifications described below.
- Keep unqualified personnel away from hazardous areas.
3.3 Special Hazards
Please comply with your country-specific norms and regulations (e.g. standards). In the case of special
applications, please comply with the relevant norms and regulations.
Non-compliance can cause heavy injuries and property damage!
Electrostatic discharge (ESD) protection is required.
The proper use of grounded worktops and personal wristbands is required when working with open
circuits (PCBs) to prevent damage to sensitive electronic components caused by electrostatic discharge.
Do not use this device in safety or emergency stop installations. Improper use of the device may result in
injury.
Danger to life due to electric current. If live parts are touched, there is an immediate danger of death.
Installation and mounting of electrical equipment may only be carried out by qualified electricians.
Operation with a defective power supply unit (e.g. short-circuit from mains voltage to output voltage) can
cause life-threatening voltages on the unit.
Warning
Warning
Warning
Danger
