Muller Elektronik SMART570, Инструкция по установке и эксплуатации

Страница: 20 / 30

6
Configuration of the terminal
System settings
20 V7.20210115 30322507-02-EN
Terminal
On this screen, you can define how the terminal should identify itself and react on the bus.
On the start screen, press:
> .
The following function icons appear on the screen:
Function icon Meaning
Switches back to the previous screen.
Changes the brightness mode.
The following parameters can be configured on this screen:
Parameter Meaning
Function ISO VT Activates and deactivates the login of the VT functionality through the
ISOBUS interface.
Instance ISO VT If there are multiple terminals on the ISOBUS, each terminal can be
assigned with an instance number. The instance number serves to assign
job computers to terminals.
Number of navigation
buttons With "1", the terminal uses button 12 for displaying the next function icons, if
the job computer want to display more than 12 function icons at the same
time.
With "2", the terminal uses button 12 for displaying the next function icons
and button 11 for displaying the previous function icons.
Vehicle
On this screen, you can configure the following sensors:
▪ Work position sensor
▪ Speed sensor
On the start screen, press:
> .
The following function icons appear on the screen:
Function icon Meaning
Switches back to the previous screen.
Changes the brightness mode.
6.3.2
Path
Controls
Parameter
6.3.3
Path
Controls