T H E W O R L D P O W E R I N A N C H O R I N G S Y S T E M S
REFERENCE GUIDE
WINDLASS INSTALLATION using QUICK FIT ADAPTOR
1.
Mount Windlass to the deck using supplied deck bolts
2.
From underneath slide Motor/Gearbox assembly into the base
adapter making sure key and keyway are aligned, then push
until retaining clip locks securely in the groove
3.
Apply Loctite 222 or equivalent to the retaining bolt, then attach
washers and bolt to the end of the shaft and tighten
NOTE:
To make installation easier, ensure
the retaining clip is fitted to the
drive assembly before pushing onto
1
2
3
To disassemble:
Remove the bottom bolt and washers, pull out the retaining
clip and then slide down the Motor/Gearbox assembly.
Grease shaft & hub with
marine grade grease or other
appropriate anti-seize
compound
VR/VRC/VFF 600 12/01/2015
muir.com.au
5