10
Close the internal client of
the device
Clear client output data
Serial Port Configuration
Set the baud rate
Set the serial port data bit
Set the serial port stop bit
Set the serial port check bit
After the service is checked,
you can use the virtual serial
port of the network port to
receive serial data through the
network port.
After checking, the data
transmission port 1 will become
the debugging serial port. You
can read and set the module
parameters.
According to the strength of
the signal, the bandwidth is
automatically limited to realize
the priority of data
transmission.
save Changes
Mugin Limited
https://www.muginuav.com E-mail: [email protected]
