BULLDOG 65 Hydraulic Steelworker
4
3
3
3
3
BRIEF DESCRIPTION OF
BRIEF DESCRIPTION OF
BRIEF DESCRIPTION OF
BRIEF DESCRIPTION OF MACHINE
MACHINE
MACHINE
MACHINE
3.1
3.1
3.1
3.1
P
P
P
P
UNCHING
UNCHING
UNCHING
UNCHING
(For details see pages 8-15)
The punching unit is fitted with a quick-change device for punches and dies. Changes are
made quickly and without a problem, and require no additional devices.
3.2
3.2
3.2
3.2
S
S
S
S
HEARING
HEARING
HEARING
HEARING
(For details see page 16-17)
The shearing unit is fitted with a simple robust hold-down which is adjustable to any thickness
of material within the cutting capacity of the machine. A shear feed table with adjustable
guides is fitted to allow the accurate feeding of materials. The guide can be adjusted to allow
mitre cutting up to 45 degrees for flat bars or to trim the flanges of angle sections previously
cut at the angle cutting station.
3.3
3.3
3.3
3.3
A
A
A
A
NGLE
NGLE
NGLE
NGLE
C
C
C
C
UTTING
UTTING
UTTING
UTTING
(For details see page 18-21)
This station provides large capacity angle cutting at 90 degrees and lighter angle cutting at 45
degrees. Angles between 45 and 90 degrees can be achieved by first cutting at 90 degrees and
then flange trimming to the required angle in the shearing station.
The hold-down supports the material thus ensuring a true cut.
3.4
3.4
3.4
3.4
S
S
S
S
ECTION
ECTION
ECTION
ECTION
C
C
C
C
UTTING
UTTING
UTTING
UTTING
(For details see pages 22-23)
The machines are fitted as standard with blades for cutting round and square bars. With extra
equipment, the machines are able to cut, in this aperture, Channels, Joists and Tee Sections.
The blades are retained by simple clamps, allowing easy changes without the need for
elaborate setting.
3.5
3.5
3.5
3.5
N
N
N
N
OTCHING
OTCHING
OTCHING
OTCHING
(For details see page 24-25)
The notching station is fitted as standard with a rectangular unit and notch table with
adjustable back stops allowing repetitive positioning. Extra equipment is available for narrow
widths or vee notching of angles up to 90 degrees vee; units are also available for bar end
shaping applications.