MUBEA SYSTEME BULLDOG 65, Инструкция по эксплуатации

Страница: 46 / 51

BULLDOG 65 Hydraulic Steelworker
42
12 12 12 12 MANUAL APPENDIX MANUAL APPENDIX MANUAL APPENDIX MANUAL APPENDIX
12.1
12.1 12.1
12.1 M
M M
M
ITRING ANGLE ITRING ANGLE ITRING ANGLE ITRING ANGLE
45
45 45
45
DEGREES ON DEGREES ON DEGREES ON DEGREES ON
BULLDOG
BULLDOG BULLDOG
BULLDOG
MACHINES MACHINES MACHINES MACHINES
Since the introduction of the requirements for health and safty, the accessability and distance
between hold-downs and blades have been amended.
To this effect the operation of mitring angle in the angle cutting station requires the following
simple hold-down adjustment.
STANDARD
HOLD-DOWN
POSITION
REMOVE THREE
SECURING SCREWS &
INVERT HOLD-DOWN
AS BELOW.
ROTATE AND SECURE THE
HOLD -DOWN TO THE
MACHINE FOR MITRING.
Once the hold-down is secured for mitring as position 3, it is also possible to use the hold-
down for cutting angle at 90 degrees if required.