MTX CANAM-10, Руководство пользователя

Страница: 2 / 12

M T X . C O M
2
IMPORTANT NOTICE
If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support
at 1-800-225-5689.
When connecting power and ground wires ensure that the red power wire is fused at the point
where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a
short circuit develops between the vehicle connection point and the product.
PRODUCT INFORMATION
Model #
Serial #
Dealer’s Name
Date of Purchase
IN THE BOX
• CANAM-10 Amplified Subwoofer Enclosure
• EBC and EBC Extension Wire
• Mounting Hardware
(2) M6-1.0x25 Hex Bolts
(2) M6-1.0 Nylon Locknuts
(4) M6 Flat Washers
(2) ST6.3 25mm Self-tapping Screws
(4) Torx Pan Head 18mm Self-tapping Screws
ADDITIONAL ACCESSORIES NEEDED AND NOT INCLUDED
MTX recommends using StreetWires PS1K-10 amp kit which includes the following:
• Power and Ground Wire to Run to the Battery
• 20A ATC Fuse Holder
• Accessory Connection Wire
• RCA Cables to Connect to the Source
INSTALLATION TOOLS
The following is a list of suggested tools needed for installation:
• Torx - T27
• Torx - T25
• Torx - T20
• Torx - T15
• 10mm Socket Wrench
•
5
⁄
16
" Drill Bit
•
1
⁄
8
" Drill Bit
INTRODUCTION
Thank you for purchasing the MTX Audio amplified subwoofer enclosure designed for the Can-Am
®
Commander and Maverick. The easy to install subwoofer is the perfect direct fit bass solution for
your Can-Am
®
vehicle. Congratulations and enjoy the ultimate audio experience with MTX!
FITS THE FOLLOWING VEHICLES
• Commander - 2 and 4 Seats (2012 and Up)
• Maverick - 2 and 4 Seats (2012 and Up)