MTX 350079, Руководство пользователя

Страница: 2 / 4

3
LASER LEVEL, PLUMB LINE LASER LEVEL, PLUMB LINE
2
ENG
ENG
CORRECT USE
Used for tiling, installation of windows, doors, hanging of paintings and etc., also for laying of pipes and
wiring.
DELIVERY COMPLETENESS
1. Square laser maker— 1 pcs.
2. Manual — 1 pcs.
TECHNICAL DATA
№ Specification Value
1 Dimensions, mm 191 × 100 × 50
2 Laser wave length, Nm 650
3 Output power, mW <1
4 Deviation, mm/m ±1
5 Battery AAA 1,5 V × 3 pcs.
6 Battery life, h Up to 8 hours in continuous mode (alkaline battery).
7 Operating temperature, °С 0–40
8 Storage temperature, °С -10–45
9 Weight, gr 154
ASSEMBLY
1
4
3 3
2
6 5
7
8
OPERATING RULES
1. Do not operate this device under direct sunlight, high temperature and humidity.
2. Do not drop the device and avoid strong shocks.
3. Do not dismantle the laser.
4. The responsibility for any improper use is carried by user.
5. If the device is placed in storage, be sure to disconnect the power and remove the battery.
ORDER OF WORK
1. Open the battery compartment cover and insert three AA batteries (drawing 1).
2. Align the laser using the 2 bubble chamber. The bubbles must be placed in the middle, between two
graduation marks
3. Fix the laser housing by two suction cups , pre-damp it and pressing 2 buttons.
4. Press the switch. Laser begins to show 2 beams under angle (drawing 2).
90°
SAFETY RULES
Do not look into the laser beam and don’t point the laser beam directly into the eyes of others,
cars or aircraft. This can lead to serious damage to the eye.
Do not point the laser beam at mirrors or other similar surface.
Drawing 1 Drawing 2
1. Switch.
2. Button.
3. Bubble level.
4. Laser. 5. Housing.
6. Angle scale.
7. Suction cup.
8. Battery compartment.