MTU M015710/04E Скачать руководство пользователя страница 130

Страница: 130 / 196

7.5 Injection Pump / HP Pump

7.5.1 HP pump – Filling with engine oil

Preconditions

☑ Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Engine oil

WARNING

Fuels are combustible.

Risk of fire and explosion!

• Avoid open flames, electrical sparks and ignition sources.

• Do not smoke.

WARNING

Oils/oil vapors are combustible/explosive.

Risk of fire and explosion!

• Avoid open flames, electric sparks and ignition sources.

• Do not smoke.

CAUTION

Fuel system high-pressure pump not filled with engine oil.

Damage to components, major material damage!

• Make sure that the high-pressure fuel pump is filled with engine oil before installation or initial

operation.

Filling HP pump

Remove plug screw (1).

Use pump oiler to fill HP pump with engine

oil until engine oil emerges.

Insert plug screw (1).

M015710/04E 2012-09 | Task Description | 145

TIM-ID: 0000001640 - 009

Содержание M015710/04E





































































































































































































Результаты поиска

Содержание M015710/04E

Отзывы:

Бренды по названию

Популярные бренды

MTU M015710/04E, Руководство по эксплуатации

Результаты поиска

Содержание M015710/04E

Отзывы:

Бренды по названию

Популярные бренды