3.
Tighten union nut of HP fuel line (1) on rail to specified tightening torque using a torque wrench.
a) For single-wall high-pressure fuel system
Name
Size
Type
Lubricant
Value/Standard
Union nut
M20
Tightening torque
(Engine oil)
37 Nm +3 Nm
b) For double-wall high-pressure fuel system
Name
Size
Type
Lubricant
Value/Standard
Union nut
M20
Tightening torque
(Engine oil)
50 Nm +5 Nm
4.
Tighten union nut of HP fuel line (1) on pressure pipe connection (3) to the specified tightening torque
using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Union nut
M16
Tightening torque
(Engine oil)
37 Nm +3 Nm
Fitting gasket and connecting in-
jector cable
1.
Place gasket on cylinder head, ensuring
correct position.
2.
Push spade lugs under the terminals (arrow) on the injector and tighten with torque wrench to the
specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Nut
M4
Tightening torque
(Engine oil)
1.5 Nm ±0.25 Nm
Final steps
1.
Install cylinder head cover (→ Page 74).
2.
Open fuel supply line.
3.
Vent fuel system (→ Page 85).
80 | Task Description | MS150118/00E 2014-07
TIM-ID: 0000050909 - 002
