MTU 12 V 4000 G73 Скачать руководство пользователя страница 81

Страница: 81 / 155

Installing injector

Remove plug before installing the injec‐

tor. (Do not remove the plug from the HP

line before installing the adapter.)

Coat injector with assembly paste at the

seat of the nozzle clamping nut.

Fit new sealing ring (4) (included in the

scope of supply of the injector) with grease

on injector, observe installation position of

sealing ring (4).

Fit new O-rings (3) (included in the scope of

supply of the injector), O-ring (2) and damp‐

ing ring (1) onto the injector and coat with

grease.

Clean sealing face on cylinder head and

protective sleeve with milling cutter.

Insert injector into cylinder head, ensuring

that the HP line adapter is correctly aligned.

Use installation/removal tool to press in in‐

jector.

Remove installation/removal tool.

MS150054/02E 2012-02 | Task Description | 81

TIM-ID: 0000000925 - 006

Содержание 12 V 4000 G73




























































































































































Результаты поиска

Содержание 12 V 4000 G73

Отзывы:

Похожие инструкции для 12 V 4000 G73

Бренды по названию

Популярные бренды

MTU 12 V 4000 G73, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 4000 G73

Отзывы:

Похожие инструкции для 12 V 4000 G73

Бренды по названию

Популярные бренды