MTU 12 V 2000 M94 Скачать руководство пользователя страница 62

Страница: 62 / 157

4.13 Plant cleaning

Preconditions

☑ Engine is stopped and starting disabled.
☑ Operating voltage is not present.

Special tools, Material, Spare parts

Designation / Use

Part No.

Qty.

Steam jet cleaner

Cleaner (Hakupur 312)

30390

WARNING

Compressed air

Risk of injury!

• Do not direct compressed-air jet at persons.

• Wear protective goggles / safety mask and ear protectors.

WARNING

Water jet.

Risk of injury and scalding!

• Do not direct water jet at persons.

• Wear protective clothing, gloves, and goggles / safety mask.

CAUTION

Excessive reaction time of cleaning agents on components.

Damage to component!

• Observe manufacturer's instructions.

• Wear protective clothing, gloves, and goggles / safety mask.

NOTICE

Dry with compressed air.

Damage to component!

• Never aim compressed air directly at electronic components.

Plant cleaning

Carry out plant cleaning only in areas where an appropriate oil separator is provided (environmental pro‐

tection).

Prior to putting the cleaning unit into operation, read the Operating Instructions of the water/steam jet unit

carefully and observe the safety precautions.

During external cleaning of the plant with water/steam-jet units, the pressure of the high-pressure jet

(cleaning jet) must not exceed 50 bar. A minimum distance between spray nozzle and plant of 1 m must

be observed. The temperature of the cleaning medium must not exceed 80 °C.

For external cleaning with high-pressure jet, use a flat-mouth nozzle only.

Carry out external cleaning as follows:

a) Seal all openings in a suitable fashion.

b) Remove coarse dirt.

c) Spray on cleaner sparingly and leave it for 1 to 5 minutes.

d) Use the high-pressure jet to remove the loosened dirt.

Note:

Never aim compressed air directly at electronic components.

e) Dry engine.

62 | Operation | MS150061/04E 2012-07

TIM-ID: 0000010171 - 024

Содержание 12 V 2000 M94






























































































































































Результаты поиска

Содержание 12 V 2000 M94

Отзывы:

Похожие инструкции для 12 V 2000 M94

Бренды по названию

Популярные бренды

MTU 12 V 2000 M94, Руководство по эксплуатации

Результаты поиска

Содержание 12 V 2000 M94

Отзывы:

Похожие инструкции для 12 V 2000 M94

Бренды по названию

Популярные бренды