MTS Systems HIEMT, Руководство пользователя

Страница: 6 / 10

~5~
F3The range is: The range is 1HZ(weak) to 5HZ(strong). strength
7.Set the storage mode. Select different modes according to the bearing capacity of the
guests and Click on “ ”store. convenient Next use and query.
8.Click on “ ”, “ ”. If you need to pause, Click on
4.Set intensity. The system default high frequency
wave intensity is 50%.Click on “+” and “-” of
“Intensity” to adjust. The range is 1%(weak) to
100%(strong).
1.Clean treatment parts.
2.In (Fig 1), click “MANUAL” to enter the interface
(Fig 5).According to the different gender. It is
suitable for fat rich parts.
F2The range i : The range is 1HZ(weak) to 38HZ(strong). strength s
F1The range is: The range is 1HZ(weak) to 30HZ(strong). strength
5. The treatment parts should be smeared gel or
creams, which is helpful for the electric wave heat
energy to transmit, and it has better result. The
amount of the work head operation can be flexible
to move.
3.Set work time. The system default work time is 30
minutes. Click on “+” and “-” of “Time setting” to
regulate. The range is 1 to 30 minutes. Each part
about 15 minutes.
6.Set frequency F1-F3.Click on “+” and “-” output strength .adjust
output strength.System output strength starts to work. font turns green .font does not
change. system output strength stops working. The range is:
9. Beautician one hand hold the Micro heat handpiece, The output intensity should be
regulated from low gradually to high energy according to endurance of customers.
During operating.The beautician should communicate with customers in time and the
customers should tell how they feel about the heat.
13. Click on
“ ”
to return to
(
Fig 1
).
11.Clean the leftovers on skin with warm water.
10.The system will pause automatically if the setting time is over.
12. Please turn off the general power switch and unplug the power supply line. other parts of the
handle shall not be cleaned with alcohol or other organic solvents to avoid damage to the.
(Fig 5)