Individual Unit, Clinical Bundle
User Manual mTrigger
™ Biofeedback System | V2-d4 | 06-01-21
Page 11 of 27
5 | Operation
5.1: Safety Precautions
Caution:
FAILURE TO COMPLY with the setup procedures and suggested
application techniques listed in the manual may lead to ineffective treatment via
improper signal transmission or device failure.
Take the following steps to secure the treatment area:
•
Clear exercise area of any obstacles.
•
If exercise is stationary, place device on a nearby table or other flat surface where
it will not impede treatment. Prop phone or tablet on provided viewing stand where
the application can be easily seen by the patient and provider, if desired. Secure
device inside
mTrigger
Wearable Wrap if available.
•
If exercise is mobile, secure the device in the
mTrigger
Wearable Wrap or a pocket
if available; if neither option is available, hold the unit during exercise.
Note
: For mobile exercises, either prop phone or tablet on provided viewing stand
where the application can be easily seen by the patient and provider, or hold mobile
device in hand.
Caution:
DO NOT rest mTrigger unit on or touching other electronic devices
(computers, printers, digital scales, etc.) as this may cause electronic interference
and improper signal transmission.
5.2: Patient Preparation
Before a treatment, perform the following preparation:
•
Ensure that the skin on the treatment area is clean, dry, and free of surface dirt or
oils for proper electrode adherence and signal reception. See instructions on
electrode packaging.
•
Ensure that Bluetooth permissions on mobile device are set to ON to enable
connection to
mTrigger
device.
5.3: Device Operation
Additional resources:
