MTR+ DoloBravo, Руководство оператора

Страница: 32 / 52

DoloBravo Bedienungsanleitung / Operators Manual
32
1. Switch on DoloBravo with “On/off” button .
2. Choose the desired program (13-15) with “PRG” button.
3
. Press
“SET”
button for at least three seconds.
DoloBravo
changes to the
programming mode and the left watch, which indicates phase duration, flashes
to the sign that this function can be changed.
In the following please use the left “+” button always then, if you want
to store your choice and to change to the next step. The right
“+/-” buttons are respectively meant for the change of the chosen and
flashing parameter.
4. Select with the right “+/-” buttons the desired time for the first phase.
5. By pressing the left “+” button you will be able to store your choice and
change to the next step . In the display now the mode flashes, which you adjust
according to your wishes by pushing the right “+/-” buttons.
If you have chosen “CONT” or “BURST” you can determine frequency and
after storage and change with the left +button respectively the pulse width by
pushing the right
“+/-” buttons.
If you have chosen “WORK/REST”- rhythm you can determine the following
parameters one after the other by pushing the right “+/-”buttons.
- frequency (
Hz )
- pulse width (
µ S
)
- working time (sec )
- rest period ( sec = recovery time)
- increase time of the impulse ( ramp up )
- way down time of the impulse ( ramp down )
- synchronous
(SYN)
or alternating
(ALT)
work of the channels A and B. If
you have selected “SYN” you can program delay -time between the channels A
and B.
Settings of the
Individual Programmes 13-15