Item no. Label/Module
Component description
1
Handset connector
Connect the spare end of the handset cord to this connector.
2
Power slot
Connect the power supply cable to the power slot.
3
Network (LAN) port
Connect the network (LAN) cable to the network connector.
Handset connected
Power cable connected
Network cable connected
4. Once all the cables are connected, the back of the phone should look as follows:
Item no. Label/Module
Component description
1
Network (LAN) port
The network (LAN) cable is connected to the phone.
2
Power slot
The power cable is connected to the phone.
3
Handset connector
The handset cord is connected to the phone.
5. Connect the free end of the network (LAN) cable to the back of the MTN fixed-LTE router.
6. Connect the power supply cable to a 220V power socket and switch on the power. The Yealink
phone should now power up and start to initialise. (Note: This process can take a few minutes.)
Phone booting up
IP Phone in the process of acquiring IP address from the router
7. If the phone shows the following items, everything is working correctly and it’s ready to make
and receive calls.
3
2
1