MTM BRT600 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 22

MTM BRT600 Скачать руководство пользователя страница 19

Petrol Powered Wheeled Brush Cutter

E&OE

©2017 MTM

19

Troubleshooting

Running combustion engines in confined areas

CAN KILL IN MINUTES

. Engine

exhaust fumes contain carbon-monoxide

– a deadly gas that you cannot smell or

see. NEVER run a combustion engine in confined areas EVEN IF windows and doors are open. ONLY run
combustion

engines OUTDOORS and away from doors, windows and vents. • Petrol/fuel/gasoline is

extremely flammable

– keep clear of naked flames or other ignition sources. • Do not have the engine

running during inspection and maintenance unless specifically required.

• The engine should be cool enough

to touch before performing maintenance activities. • Some maintenance activities described may be beyond
the scope of some users. For procedures that you are not comfortable with or have the tools or experience
for, have the unit serviced by a service centre or qualified technician.

The following information may assist in identifying a problem and rectifying it.

Difficulty starting the engine.

Possible Fault

Action

Lack of fuel

Check that there is fuel in the tank and that the fuel system is primed.

• To further check if

fuel is reaching the carburettor, remove the carburettor drain plug and check if fuel drains.

Carbon build-up on spark plug

Remove the spark plug and clean any carbon from the electrodes before re-installing it.

Spark plug faulty

Remove the spark plug, then reconnect the plug lead to it. Place fuel tap in the

“OFF”

position and the

engine ON/OFF switch in “ON” position. Touch the spark plug electrode to a

part of the engine crankcase, away from the spark plug hole, and attempt to start the engine
– a spark should be visible across the electrodes as the engine is rotated. If no spark is
visible, replace the spark plug.

Engine “flooded” with fuel

Place the choke in

“HOT” or “RUN” position. Leave the ON/OFF switch in the “OFF” position.

Pull the starter cord several times to assist clearing excess fuel from engine before
attempting to start engine.

Engine starts but does not idle.

Possible Fault

Action

Blocked air filter

Check and clean the air filter.

Idle speed requires adjustment

Adjust idle speed until engine runs smoothly and at a reasonable speed when idling.

Difficulty restarting the engine after use or engine stops suddenly during use.

Possible Fault

Action

No fuel

Check fuel level and ensure adequate fuel is available.

Overheating

Allow engine to cool before restarting. If possible, improve engine cooling, such as operating
in lower temperatures or in shade etc.

Carbon build-up on spark plug

Remove the spark plug and clean any carbon from the electrodes before re-installing it.

Carburettor blocked

Clean the carburettor.

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

«
...
17
18
19
20
21
...
»

Содержание BRT600























Отзывы:

Нет отзывов