MTM BRT600 Скачать руководство пользователя | Manualshive

Страница: 10 / 22

background image

Petrol Powered Wheeled Brush Cutter

E&OE

©2017 MTM

10

Attaching Cutting Tools

Do NOT attach or detach cutting tools when the engine is running.

• Ensure that parts are

cool enough to touch before attaching or detaching cutting tools.

• Always check that the

blades or cutting accessories are undamaged, safe to use and are properly and securely fastened to the
machine.

• Ensure that brush cutter and brush saw blades are installed so that they rotate in the direction of

the cutting edges. • Do NOT use cutting equipment that is cracked, bent, chipped or damaged in any way.
Replace damaged parts.

• The brush cutter and brush saw blades are not designed to be re-sharpened.

1. Place the drive washer (

A

) on to the drive shaft (

B

) protruding from the attachment head (

C

). Ensure that

the grooves in the washer align with the splines on the drive shaft.

2. Place the attachment on to the drive washer:

For the brush cutter and brush saw:

a.

Place the brush cutter or brush saw
attachment (

D

) on to the drive washer.

Ensure that direction of the cutting teeth or
blades faces the direction shown by the
blue arrow. Ensure that the hole in the
centre of the attachment sites squarely on
the raised portion of the drive washer.

b.

Place the cup washer (

E

) over the drive

shaft, then secure the assembly with the
nut (

F

). The thread on the drive shaft is

"left-hand". This means that you must
rotate the nut to the left (anti-clockwise) to
screw it on as shown by the yellow arrow.
Firmly tighten the nut using the supplied spanner. To prevent the drive shaft from rotating as you
tighten the nut, insert a suitable object (

G

) (Allen key, screwdriver etc) through the hole in the

attachment head and into the hole in the drive washer when tightening

– you may need to rotate

the drive washer until the holes are aligned. Remove the object when the nut is secured.

For the grass cutting head:

a. Screw the grass cutting head (

H

) on to the drive

shaft. The thread on the drive shaft is "left-
hand". This means that you must rotate the
grass cutting head to the left (anti-clockwise) to
screw it on as shown by the yellow arrow.
Firmly tighten the grass cutting head by hand.
To prevent the drive shaft from rotating as you
tighten the grass cutting head, insert a suitable
object (

G

) (Allen key, screwdriver etc) through

the hole in the attachment head and into the
hole in the drive washer when tightening

– you

may need to rotate the drive washer until the
holes are aligned. Remove the object when the
nut is secured.

H

G

G

A

D

C

E

F

B

A

B

C

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM MTM

«
...
8
9
10
11
12
...
»

Содержание BRT600























Отзывы:

Нет отзывов

Похожие инструкции для BRT600

Бренд: Zenoah Страницы: 64

Бренд: Sawyer Страницы: 4

Бренд: ALLSPEEDS Страницы: 14

Бренд: ALFRA Страницы: 8

Бренд: Toyama Страницы: 60

SuperCut FSC 2.0-SC

Бренд: Fein Страницы: 3

Special Cutter FSC 1.6

Бренд: Fein Страницы: 3

Бренд: Fein Страницы: 3

Big Shot Machin

Бренд: SIZZIX Страницы: 26

Team System Plus 440-1

Бренд: Logan Страницы: 2

Бренд: Dremel Страницы: 64

Бренд: TRI tool Страницы: 22

Classen HSC185E

Бренд: Schiller Grounds Care Страницы: 32

Luna Machinery KD 310

Бренд: YILMAZ Страницы: 28

Бренд: AGT Страницы: 20

Бренд: Hanatek Страницы: 15

Бренд: Zenoah Страницы: 64

Бренд: RASOR Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды