Instructions for Use
1. Parts
The product consists of a Sciaticalm unit, leg and back straps and
one AAA battery.
2. Preparation for use
The unit requires 1 x AAA battery (included).
Before use, unscrew the battery cover cap and if fitted remove
the insulation tab and any packaging from the battery. Re-screw
the battery cover cap tightly.
Always insert the battery
carefully, taking care to
insert in the correct
orientation. Inside the battery
compartment the terminals are
identified with a ‘+’ and ‘-’.
4. Fitting the unit
Thread the strap through the slot
with the fibrous side facing the
battery compartment.
Slide the unit the length of the
strap and secure under the tab.
Place the unit on the point of pain
and loop the end of the strap
through the black end buckle.
Use the longer strap for positioning
on the lower back or lumbar
region. The unit can be rotated to
point downwards if necessary.
Use the shorter strap for positioning
on the back of the leg behind the
knee. The unit can now be operated
by pressing the start/stop button.
Warnings and Safety
Before using the device, please read and understand the following warnings
to ensure the safe and correct use of the device and to prevent any injury.
•
Do not throw or drop the device from a height. The unit should not be
used if any physical damage is evident.
•
Do not use any chemicals to clean any part of the unit.
•
Only to be used by persons over the age of 18 years old.
Medical electrical equipment requires special precautions regarding
electromagnetic compatibility (EMC) and must be installed and used
according to the instructions contained in this manual. Portable or mobile
radio communication equipment may affect medical electrical equipment.
•
Do not use the device unless your condition has been diagnosed by a doctor.
•
Do not use for conditions other than mechanical back pain and sciatica.
•
Ensure that the battery is installed correctly.
•
The device is designed for use on the leg or lower back (lumbar region);
do not use on any other part of the body.
3. Using the unit
In order to optimise the performance of the device, the nozzle on
the lower side needs to be placed over the sciatic nerve using one
of the straps provided. This can be either on the lower back or leg.
It may be necessary to move the device to find the optimum
position for pain relief.
The strap is then secured in order to hold the device in place while
not restricting the blood flow by ‘over-tightening’.
The start/stop button on the battery cover is then depressed in
order to activate the unit. The Sciaticalm unit can be stopped or
started manually at any time by depressing the start/stop button.
Do not exceed a 10 minute cycle each time you use the device.
It is recommended that the Sciaticalm unit is used for 30 minutes
each day, in separate 10 minute treatments. You can use the
device for less than 3 cycles per day, or for a shorter time. Use the
device for 3-4 weeks for maximum benefit.
Battery Cover
Strap Slot
Vibration
Head
•
If you feel unwell or experience any discomfort at any time, stop using
the device immediately.
•
If you notice any reddening of the skin, stop using the device immediately.
•
Only apply the device to normal skin. If suffering from a skin condition
or new scar tissue is present in the area of application, seek medical
advice before use.
•
Do not use the device while sleeping.
•
Do not disassemble, repair or modify the device in any way, as this will
invalidate the warranty and may lead to malfunction of the device or an injury.
•
Do not immerse the device in water or any other fluid.
Start / Stop
Button
Press here
Longer strap for
lumbar region
Shorter strap
for back of leg
Fibrous side
