MTI Versa EX Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 9

MTI Versa EX Скачать руководство пользователя страница 4

1

1

ENTER NETWORK MODE FOR MTI LOCKS

Swipe Network Pairing card to enter enrollment mode. You will hear slow beep tones indicating it is in pairing mode. A
double beep at the end indicates successful pairing.

2

From an armed state, place the user key over the RFID
icon to disarm the system. LED will be flashing white.

1

VERSA EX

™

PRODUCT MANUAL

4

MTI P/N 063-00393 rev A ©2021 MTI All Rights Reserved

www.mtigs.com | T:800.426.6844

To silence an alarm, tap the user card over the RFID
icon. Will silence alarm on position that is alarming. All
other positions will remain armed. To disarm all, tap
Versa key again. To clear alarm condition from position,
check all triggers and re-arm the whole position.

MANAGING ALARMS

1

MICRO II LOCKDOWN MODE ACTIVATION

Tap and hold Versa Key onto Versa EX for 10 seconds.
Position will double beep immediately, and then again
when lockdown mode has been activated. Repeat step
to toggle back to unlocked mode.

ADDING NEW USER KEYS

Place Authorization Card over the RFID icon. Follow Key
Whitelist process starting on page 3.

«
...
2
3
4
5
6
...
»

Содержание Versa EX










Отзывы:

Нет отзывов