manualshive.com logo in svg

MTI R547, Руководство пользователя

Поделиться
Скачать
MTI R547 Скачать руководство пользователя страница 2

_________________________________________________________________

Introduction

Welcome to the M-Technology next generation high performance
Pentium system mainboard ---

 R-547.

 The R-547 using the high

performance SiS 5582 Chipset that will deliver superior
performance on your personal computer.

About This User's Guide

This User's Guide is for assisting system manufacturers and end users
in setting up and installing the mainboard. Information in this guide has
been carefully checked for reliability; however, there may
still be inaccuracies and information in this document is subject to
change without notice.

DISCLAIMER

The information in this manual has been carefully checked and is
believed to be accurate. We assumes no responsibility for any
inaccuracies that may still be contained in this manual. We reserves
the right to make changes to this material at any time without notice.

※

 All Brand  names are trademarks of their owners.

____________________________________________________________________

＊

 Our home page on Internet "http: //www.mtiusa.com"

Содержание R547





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды